SW-M150 SDI&HDMI 150m Wireless System

The Transmitter (Tx) has 2 omni antennas, supports:
1x 3G/HD-SDI input
1x 3G/HD-SDI loop output
1x HDMI 1.3 input

The Receiver (Rx) has 3 omni antennas, supports:
2x 3G/HD-SDI output
1x HDMI 1.3 output

SDI & HDMI formats:
1080p60, 1080p59.94, 1080p50
1080p23.98, 1080p24; 1080p25, 1080p29.97, 1080p30;
1080i60, 1080i59.94, 1080i50;
720p60, 720p59.94, 720p5

In Line-of-Sight, SW-M150 supports non-compressed 3G/HD-SDI and HDMI 150 meters (500 feet) transmission, with less than 1 millisecond latency. 
SW-M150 supports SDI & HDMI embedded audio (CH1&2) transmission, and supports SDI Timecode & Trigger transmission.

Both Tx and Rx are equipped with OLED to display signal format, wireless channel number and signal strength.
On the Tx, push the joystick up/down to switch wireless channels from CH0 to CH10, and indicates the signal bars. When changing to a new channel, the paired Rx will follow the new channel automatically.
On the Rx, push the joystick right to enter wireless condition analysis, and after 10 seconds, the OLED will display the signal strength of all 11 wireless channels, and helps to select a best channel to work.
Support 3-4 pairs wireless channels to work together in one location.

* For DFS comply, use CH 0/1/2/3/9/10 only, or switch to AUTO mode.

The Transmitter and Receiver need to pair and work encrypted. Supports Max 1 to 4 multicast. Any unpaired receivers can’t been connected with theTransmitter, in order to protect the camera footages.
 

Some of the cine cameras like Alexa Mini, Red Raven, when operate playback on the camera, the output SDI clock was interrupted and will break the wireless video transmission.
SW-M series provide the “Instant Playback” mode, to support the constant wireless video receiving.
On the Tx, push the joystick right to enter menu, and set “InsPB” to “ON”, to switch on the “Instant Playback” Mode.

Due to the wireless chip limitation, the normal wireless systems cannot truely reproduce colors.
SW-M series made particular algorithm modifications, to ensure a broadcast level accurate color reproduction. 

Both Tx and Rx provide 7-34V 2-pin lockable DC input.
The Tx can be powered by DV batteries. The following DV plates are provided for selection:

The Rx can be selected from V-mount (Default) and Gold mount battery plates.

SW-M150 standard package includes:
1x Transmitter
1x Receiver
1x Articulating arm trestle (Cold shoe and 1/4”)
1x D-tap to pole-tap DC cable
1x AC-DC power adaptor
1x Carrying case (for everything)

SW-M150 1T2R Kit includes:
1x Transmitter 
2x Receiver
1x Articulating arm trestle (Cold shoe and 1/4”)
2x D-tap to pole-tap DC cable
2x AC-DC adaptor
1x Carrying case (for everything)

Two years conditional.