Square shape design for Cine-cameras
PB-S series camera batteries are compact designed, shorter than normal V-mount batteries, and match perfectly with most of the Cine-cameras.
 
220Wh / 15.3Ah Capacity
Consists of 24pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 220Wh / 15.3Ah high capacity.
Can run approx 7 hours for normal ENG cameras and approx 2.5 hours for ARRI ALEXA. 
 
High Load for Cine Cameras
200W / 16A constant output
PB-S220S provides at least 200W/16A high load even at 1% capacity, to drive high power Cine cam- eras and on-camera devices together. The high load cells will also ensure battery life comparing to normal load batteries if long time full load output. 
 
Multiple output sockets design
4× D-tap output sockets, 1× USB 5V/2A power output socket
PB-S220S is equipped with 4 D-tap DC output sockets, Max total load is 120W/10A, which can power other on-camera equipments together.
PB-S220S is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices.
 
6A Fast Charging
Using SWIT S-3812S fast charger
PB-S220S supports 6A fast charging by SWIT S-3812 fast charger, saving more than 50% charging time. The 220Wh PB-S220S battery can be charged from 0 to 80% after 2.3 hours, and fully charged within 3.5 hours. 
 
Digital Power Info
LCD display accurate remaining run time
The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.
 
LCD alarm code description
①P01～P13: The battery trigger protection function and it can be recovered; 
② When the battery rests over 10 days or runs out of power,it will enter sleep mode and the LCD will not display.
③ E01～E03: Not recoverable error, please contact manufacturers to repair, do not disassemble the battery.
Common battery protection code: 
P01
Run out of power, please charge the battery asap.
P02
Over-voltage when charging, please remove the battery, discharge the battery to decrease the battery voltage to restore.
P03
Over-current when charging, please remove the battery, and it will restore after 30 seconds’ standing.
P05～P07
The load is too heavy, please remove the battery, and it will restore after 30 seconds’ standing.
P08～P09
Battery short circuit, please make sure that there is no foreign body between the electrodes or remove the battery, and it will restore after 30 seconds’ standing.
P10～P13
Temperature protection, please remove the battery and place at room temperature to recover